Release Announcement Archives - Page 4 of 25

0.99.5 2017-05-03
– fix tautology comparison in tautology in `fjson_object_iter_equal`
– made build under Solaris again
– made to build under AIX
Thanks to github user purnimam1 for the patch
– fix floating point representation when fractional part is missing
see also https://github.com/rsyslog/libfastjson/issues/126
Thanks to Jan Gerhards for the patch.
– m4: fix detection of atomics
In cross-compilation, it is impossible to run code at configure time to
detect the target specifics.
As such, AC_TRY_RUN fails miserably to detect reliably that atomic
intrisics are present in a toolchain, and decides they are not just
because this is cross-compilation.
Instead of AC_TRY_RUN, use AC_LINK_IFELSE that does not need to actually
run code, since all we’re interested in is whether the intrisics are
present (or not). Fix both the 32- and 64-bit variants, even if the
latter is not used currently.
Fixes build failures detected by the Buildroot autobuilders, like:
http://autobuild.buildroot.org/results/23a/23ac0e742ed3a70ae4d038f8c9eadc23e708f671/build-end.log
http://autobuild.buildroot.org/results/192/1923d0b570adba494f83747a9610ea6ec35f5223/build-end.log
and many other cases, espcially on architectures where such intrsics are
present, but where the toolchain does not have threads (and anyway, it
is much more efficient to use the intrisics rather than use mutexes).
Thanks to Yann E. MORIN for the patch.
– add fjson_object_dump() and fjson_object_write() functions
… that make it possible to dump the json tree without having to
dynamically allocate a string, and to write the tree to a FILE*.
NOTE: right now, most of the code is simply copied from the functions
that use the “printbuf” for writing the data. I have not touched the old
printbuf-implementation, because some other code may still rely on it.
However, in my opinion these printbuf-based functions (if it is desirable
to keep them in the first place) can now be re-implemented to use the more
flexible fjson_object_dump() function.
MAINTAINER NOTE: we need to performance-test any new implementation and will
do so. The results will ultimately decide which parts of the code remain in
the codebase.
Thanks to Emiel Bruijntjes for the patch.

Download:

http://download.rsyslog.com/libfastjson/libfastjson-0.99.5.tar.gz

sha256sum: 8aecdc111da2beebc09e99e2b51e13b70f219c5a095c38db953a75fde51779e9

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.26.0 (v8-stable) released

By Adiscon SupportPosted on April 4, 2017Posted in News, Release AnnouncementTagged bugfix, core, error reporting, imptcp, imrelp, liblognorm, omfwd, release, rsyslog, v8

We have released rsyslog 8.26.0.

This release has liblognorm 2.0.3 as a build requirement. Also, there were quite some changes like internal error messages are enabled at all times and many more fixes and additions to modules like imrelp, imptcp, omfwd and many many more.

For a complete list of changes, fixes and enhancements, please visit the ChangeLog.

ChangeLog:

https://github.com/rsyslog/rsyslog/blob/v8-stable/ChangeLog

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

RSyslog Windows Agent 4.1 Released

By Adiscon SupportPosted on March 27, 2017Posted in News, Release AnnouncementTagged 4.1, bugfix, config, EventLog Monitor, file config, RSyslog Windows Agent

Adiscon is proud to announce the 4.1 release of MonitorWare Agent.

Rsyslog Windows Agent is now able to reload it’s configuration automatically if enabled (Which is done by the configuration client
automatically on first start). It is not necessary to restart the service manually anymore.

Performance enhancing options have been added into EventLog Monitor V1 and V2 and in File Monitor to delay writing the last record/fileposition back to disk. This can incease performance on machines with a very high eventlog or file load.

Detailed information can be found in the version history below.

Build-IDs: Service 4.1.0.166, Client 4.1.0.246

Features

Updated to OpenSSL 1.0.2k.
Configuration Reload: This is a big new core feature allowing the
service to reload itself automatically after a configuration changed has
been detected. The feature can be turned off in General-General Options if
this new behavior is not wanted. By default auto reload will be enabled.
The latest Configuration Client is required for the feature to fully work.
EventLog Monitor V2: Added new options to delay LastRecord save.
Enabling this option will improve processing performance of machines with
a high event volume.
EventLog Monitor V1: Added new option to delay LastRecord save. Enabling
this option will improve processing performance of machines with a high
event volume.
File Monitor: Added new option to delay LastFilePosition save. Enabling
this option will improve processing performance when processing large
growing files.
FileConfig: Changed datafile saving method, more reliable when the
service is stopped unintentionally while updating data state files.
Send Syslog Action: Added new option to enable/disable UTF8 BOM. Default
is enabled like before, but it can be disabled now by configuration so the
message won’t contain the UTF8 BOM.

Bugfixes

Property Engine: Fixed SystemID and CustomerID properties.v
FileConfig: Due a missing property (FilterVersion), some of the global
conditions in rule filters could not be used. This automatically fixes
itself next time the configuration is saved with the Client.
Debug Logging: Completely rewritten debug output for Rule Engine
(Filters) for better readability and analysis.
Fixed an compatibility issue on Windows 2003/XP (failed to start because
WSAPoll API is missing).
FileConfig: Fixed an issue with invalid linefeeds when using includefile
directive.
FileConfig: Fixed EnumRegkey emulation causing EventLog Monitor Services
to load invalid eventlog channels.
Debug Logging: Moved RELP Debugging from minimal to internal
FileMonitor: Fixed issue rewriting filepointer updates each time when
wildcards support was enabled.

Version 4.1 is a free download. Customers with existing 3.x keys can contact our Sales department for upgrade prices. If you have a valid Upgrade Insurance ID, you can request a free new key by sending your Upgrade Insurance ID to sales@adiscon.com. Please note that the download enables the free 30-day trial version if used without a key – so you can right now go ahead and evaluate it.

rsyslog 8.25.0 (v8-stable) released

By Adiscon SupportPosted on February 21, 2017Posted in News, Release AnnouncementTagged 8.25.0, bugfix, imfile, rsyslog, stable, v8

We have released rsyslog 8.25.0.

This release brings quite a number of changes and fixes. The most notable is that imfile now supports wildcards in directory names, which permits to monitor newly created directories without making changes to the configuration.

For a complete list of changes, fixes and enhancements, please visit the ChangeLog.

ChangeLog:

https://github.com/rsyslog/rsyslog/blob/v8-stable/ChangeLog

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.24.0 (v8-stable) released

By Adiscon SupportPosted on January 10, 2017Posted in News, Release AnnouncementTagged 8.24.0, AIX, bugfix, imudp, mmdblookup, mmrm1stspace, omelasticsearch, omfwd, omzmq, rsyslog, v8

We have released rsyslog 8.24.0.

This first release for 2017 brings a lot of changes. Most are detail enhancements for different modules. The biggest change is probably, that rsyslog now builds on the AIX platform. Also 8.24.0 has two new message modification modules, which might be worth checking out. And a very useful addition is the ability to bind imudp and omfwd to a specific device.

For a complete list of changes, fixes and enhancements, please visit the ChangeLog.

ChangeLog:

https://github.com/rsyslog/rsyslog/blob/v8-stable/ChangeLog

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

RSyslog Windows Agent 4.0 Released

By Adiscon SupportPosted on December 8, 2016Posted in News, Release AnnouncementTagged 4.0, bugfix, release, RSyslog Windows Agent, Windows 2016

Adiscon is proud to announce the 4.0 release of RSyslog Windows Agent.

RSyslog Windows Agent now fully supports Windows Server 2016 and is ready to be used in the most demanding environments.

Also, the latest RELP subsystem is now supported. As another highlight, internationalization has been enhanced by even better support and automatic detection of various character sets, including for example Japanese.

Detailed information can be found in the version history below.

Build-IDs: Service 4.0.0.160, Client 4.0.0.240

Features

Added Windows 2016 Support.
Updated Syslog RFC3195 liblogging library
Updated librelp library to 1.2.11
File Monitor: Added support for UTF16 Big Endian

Bugfixes

File Configuration: Fixed an issue loading file configuration when invalid characters where within config files like UTF8 BOM.
Syslog Server: Fixed internal issue when receiving empty syslog messages.

Version 4.0 is a free download. Customers with existing 3.x keys can contact our Sales department for upgrade prices. If you have a valid Upgrade Insurance ID, you can request a free new key by sending your Upgrade Insurance ID to sales@adiscon.com. Please note that the download enables the free 30-day trial version if used without a key – so you can right now go ahead and evaluate it.

rsyslog 8.23.0 (v8-stable) released

By Adiscon SupportPosted on November 15, 2016Posted in News, Release AnnouncementTagged bugfix, imfile, ksi, libksi, omelasticsearch, omfile, release, rsyslog, stable, v8

We have released rsyslog 8.23.0.

This release is packed with changes and enhancements. One of the most interesting might be the removal of the SHA2-224 hash algorithm for KSI signatures. This is considered insecure and is no longer supported by the KSI library. Also notable are the changes to imfile, omfile and omelasticsearch, among lots of others. Please take a look at the Changelog for a full overview.

Note: We delayed the next release by two weeks to the Jan 10, so we don’t have to deal with a release around the Christmas holidays. This also means that 8.23.0 is the final release for 2016.

ChangeLog:

https://github.com/rsyslog/rsyslog/blob/v8-stable/ChangeLog

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.22.0 (v8-stable) released

By Adiscon SupportPosted on October 4, 2016Posted in News, Release AnnouncementTagged bugfix, ompgsql, release, rsyslog, stable, v8

We have released rsyslog 8.22.0.

This release is mostly for maintenance. It has a somewhat improved error output for config file syntax errors, a bugfix for omhiredis and general code cleanup and improvment. The only new function is the added template support for ompgsql.

To get a full overview over the changes, please take a look at the Changelog.

ChangeLog:

https://github.com/rsyslog/rsyslog/blob/v8-stable/ChangeLog

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

RSyslog Windows Agent 3.3 Released

By Adiscon SupportPosted on September 19, 2016Posted in News, Release AnnouncementTagged bugfix, eventlog monitor v2, OpenSSL, release, RELP, rsyslog, RSyslog Windows Agent, syslog

Adiscon is proud to announce the 3.3 release of RSyslog Windows Agent.

This is a bugfixing release with minor feature update.

Most importantly, the Adiscon SNMP MIB now supports messages sizes up to 64k (previous limit was 255 characters). The OpenSSL Library has been updated to 1.0.2h. Bugs were fixed primarily in RELP and syslog forwarding processing. For details please see the change log.

Detailed information can be found in the version history below.

Build-IDs: Service 3.3.152, Client 3.3.235

Features

Components:
- OpenSSL library updated to 1.0.2h.
Adiscon SNMP Mib:
- Changed DisplayString limit from 255 characters to 65536. Now, strings above 255 characters can be send using the adiscon mibs.

Bugfixes

Send Syslog Action:
- Fixed an issue with the “Disable processing, forward as it is” Option. RawSyslogMsg property is used instead of msg property.
Send Relp Action:
- Fixed an issue in the Session Close shutdown procedure which could lead to leaking sessions on Relp Servers.
- Send Relp Action: Fixed an issue setting a proper status on failure.
- Fixed a problem handling socket failures.
Event Monitor V2:
- Dynamic properties could break XML format if they contained spaces in their name. Spaces and control characters are now properly replaced with underscores.
Relp Listener:
- Fixed Socketsystem startup if only one Relp Listener Service was configured without any other network related services.
Syslog Server:
- Fixed an issue relaying the priority / facility properties on Syslog Forward. The prifac property was not properly recreated if the message source was Syslog.
- Fixed an issue with RFC5424 header parsing which partially parsed invalid formatted syslog messages. This broke the original message.
- Fixed a parsing issue (TCP Protocol only) when the syslog header was missing. When the first characters were a number, TCP Syslog tried to detect octet framing. This failed but the beginning characters of the message were lost. Also octet framing was not disabled resulting in unexpected endings of the message.
- Fixed an issue with RFC 3164 Syslog Header parsing when “take syslog source from msg” is enabled.
Property Replacer:
- Date related options are now evaluated before and after the property is truncated. But only if a match before the string truncation was not successful.

Version 3.3 is a free download. Customers with existing 2.x keys can contact our Sales department for upgrade prices. If you have a valid Upgrade Insurance ID, you can request a free new key by sending your Upgrade Insurance ID to sales@adiscon.com. Please note that the download enables the free 30-day trial version if used without a key – so you can right now go ahead and evaluate it.