release

rsyslog 8.15.0 (v8-stable) released

By Adiscon SupportPosted on December 15, 2015Posted in News, Release AnnouncementTagged 0mq, 8.15.0, bugfix, ksi, omelasticsearch, omkafka, pmciscoios, release, rsyslog, stable, v8

We have released rsyslog 8.15.0.

This release sports a lot of changes. Among the changes are a lot of bugfixes, changes to the KSI support, pmciscoios, omkafka, 0mq modules, omelasticsearch and many more.

To get a full overview over the changes, please take a look at the Changelog.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-15-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.14.0 (v8-stable) released

By Adiscon SupportPosted on November 3, 2015Posted in News, Release AnnouncementTagged bugfix, property, release, rsyslog, stable, v8

We have released rsyslog 8.14.0.

This is primarily a bug-fixing release with a couple of fixes for imfile and Rainerscript. Also the property engine has now a new property: rawmsg-after-pri.

For more details, please take a look at the Changelog.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-14-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.13.0 (v8-stable) released

By Adiscon SupportPosted on September 22, 2015Posted in News, Release AnnouncementTagged 8.13.0, bugfix, mmnormalize, omhiredis, release, stable, v8, zmq

We have released rsyslog 8.13.0.

This release sports a big number of changes. While most are bugfixes, there are also some additions to existing functionality, most notably the enhancements for ZeroMQ and Redis modules.

For more details, please take a look at the Changelog.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-13-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.12.0 (v8-stable) released

By Adiscon SupportPosted on August 11, 2015Posted in News, Release AnnouncementTagged 8.12.0, bugfix, ksi, release, rsyslog, stable, v8

We have released rsyslog 8.12.0.

This is primarily a bug-fixing release with a couple of improvements in omfile, imfile, GT/KSI, the testbench and many more. For more details, please take a look at the Changelog.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-12-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.11.0 (v8-stable) released

By Adiscon SupportPosted on June 30, 2015Posted in News, Release AnnouncementTagged 8.11.0, bugfix, imfile, ksi, release, rsyslog, stable, v8

We have released rsyslog 8.11.0.

This release now provides a new signature provider for Keyless Signature Infrastructure (KSI) as well as quite a few fixes for imfile, omkafka, the build system and others.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-11-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

RSyslog Windows Agent 3.1 Released

By Adiscon SupportPosted on June 3, 2015Posted in News, Release AnnouncementTagged 3.1, core engine, File Monitor, release, RSyslog Windows Agent, syslog

Adiscon is proud to announce the 3.1 release of RSyslog Windows Agent.

This is a maintenenance release for RSyslog Windows Agent. It includes some bugfixes as well as a new rule date condition which can be used to process events starting from a certain date. A few new options have been added into the Syslog Service as well.

Detailed information can be found in the version history below.

Build-IDs: Service 3.1.0.134, Client 3.1.0.213

Features

All internal errors are now logged into the EventLog when “Event Warnings” are enabled in general options.
Added Rule Date Conditions. By default a rule will always be processed. It can be set to only process messages generated since the installation or custom date.
Syslog Server: Added new Option to save original source into custom property when using “Take Source system from Syslog message” option.
File Monitor: Files are now opened with FILE_SHARE_DELETE flag which enables other applications to delete them (like logrotation tools do).

Bugfixes

SSL Connections: Fixed an issue not using custom configured certificates when TLS anon mod was used.
FileConfig Mode: Fixed a bug loading filters properly. Also added support for reloading data variables automatically.
Core Engine: Fixed an internal processing bug caused when rebuilding Messages from cache files.
Syslog Server: RFC 5424 header parsing fixed, a timestamp can be a NILVALUE now.
Syslog Server: Fixed bug ignoring “Take Source system from Syslog message” option when UDP was used.

Version 3.1 is a free download. Customers with existing 2.x keys can contact our Sales department for upgrade prices. If you have a valid Upgrade Insurance ID, you can request a free new key by sending your Upgrade Insurance ID to sales@adiscon.com. Please note that the download enables the free 30-day trial version if used without a key – so you can right now go ahead and evaluate it.

rsyslog 8.10.0 (v8-stable) released

By Adiscon SupportPosted on May 19, 2015Posted in News, Release AnnouncementTagged 8.10.0, bugfix, imfile, omhttpfs, release, rsyslog, stable, v8, zmq

We have released rsyslog 8.10.0.

This provides a number of new features and fixes in several modules, like imfile, zmq and others. It also adds a new contributed module omhttpfs for writing to HDFS via HTTP.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-10-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.9.0 (v8-stable) released

By Adiscon SupportPosted on April 7, 2015Posted in News, Release AnnouncementTagged 0mq, 8.9.0, bugfix, imtcp, imuxsock, omprog, release, rsyslog, stable, v8

We have released rsyslog 8.9.0.

This is primarily a bug-fixing release with a couple of improvements in omprog, imuxsock and the zero message queue plugins.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-9-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

rsyslog 8.8.0 (v8-stable) released

By adisconteamPosted on February 24, 2015Posted in News, Release AnnouncementTagged 8.8.0, bugfixes, release, stable, v8

We have released rsyslog 8.8.0.

This is primarily a bug-fixing release, which also includes a number of new features focussed on practical issues and improvements in problem diagnostics.

ChangeLog:

http://www.rsyslog.com/changelog-for-8-8-0-v8-stable/

Download:

http://www.rsyslog.com/downloads/download-v8-stable/

As always, feedback is appreciated.

Best regards,
Tim Eifler

RSyslog Windows Agent 3.0 Released

By Adiscon SupportPosted on February 17, 2015Posted in News, Release AnnouncementTagged 3.0, core engine, NetApp, release, RSyslog Windows Agent

Adiscon is proud to announce the 3.0 release of RSyslog Windows Agent.

This new major release adds full support for Windows 2012 R2 and also has been verified to work on Windows 10 preview versions.

The new major version is a milestone in many ways. Most important the performance of the core engine has been considerably increased. All existing configurations will benefit from this. Also a new Configuration Client has been added which has been rewritten using the .Net Framework (Like the InterActive Syslog Viewer). With the new Configuration Client, we also introduce support for a new file based configuration format (as an alternative to the registry-based method). RSyslog Windows Agent can now run from a configuration file and save it state values
into files.

We also extended the classic EventLog Monitor to support multiple dynamic *.evt files for NetApp customers.

Detailed information can be found in the version history below.

Build-IDs: Service 3.0.130, Client 3.0.201

Features

Faster core engine
New Configuration Client running on Microsoft .Net Framework. If wanted, the old client application can be installed manually as “RSyslog Windows Agent Legacy Client”.
The Agent can be switched from registry to file based configuration support. Requires usage of the new configuration client.
EventLog Monitor Classic(V1): Support for dynamic Eventlog files added.
Kindly use an asterix (*) in the eventlog filename to activate it, for example: \\netappdevice\c$\etc\log\adtlog.*.evt
When activated, EventLog Monitor will process all matching files automatically. The feature was primary added for NETAPP users who have dynamic filenames.
New System Property added to created UUID’s called “$NEWUUID”. Generates a random generated 128Bit UUID (Universally Unique Identifiers).

Bugfixes

none

Version 3.0 is a free download. Customers with existing 2.x keys can contact our Sales department for upgrade prices. If you have a valid Upgrade Insurance ID, you can request a free new key by sending your Upgrade Insurance ID to sales@adiscon.com. Please note that the download enables the free 30-day trial version if used without a key – so you can right now go ahead and evaluate it.