rsyslog

The rocket-fast system for log processing pipelines

rsyslog

rsyslog 6.2.2 (v6-stable) released

By Adiscon SupportPosted on Posted in News, Release AnnouncementTagged , , , , ,

This is a bug-fixing release. Updating is recommended for users of the v6-stable branch. New users please note that in order to build this release, libestr, libee and optionally liblognorm (for mmnormalize) is required.

For more information about the fixes, please refer to the ChangeLog.

ChangeLog:

http://www.rsyslog.com/changelog-for-6-2-2-v6-stable/

Download:

http://www.rsyslog.com/rsyslog-6-2-2-v6-stable/

As always, feedback is appreciated.

Best regards,
Florian Riedl

Changelog for 6.2.2 (v6-stable)

By Adiscon SupportPosted on Posted in ChangelogTagged , , , , ,

Version 6.2.2  [v6-stable], 2012-06-13

  • build system improvements and spec file templates
    Thanks to Abby Edwards for providing these enhancements
  • bugfix: disk queue was not persisted on shutdown, regression of fix to
    http://bugzilla.adiscon.com/show_bug.cgi?id=299
    The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed.
  • bugfix: –enable-smcustbindcdr configure directive did not work
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=330
    Thanks to Ultrabug for the patch.
  • add small delay (50ms) after sending shutdown message. There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system.
    Thanks to Marcin for bringing this problem up.
  • support for resolving huge groups
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310
    Thanks to Alec Warner for the patch
  • bugfix: potential hang due to mutex deadlock
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316
    Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it.
  • bugfix: property PROCID empty instead of proper nilvalue if not present
    If it is not present, it must have the nilvalue “-” as of RFC5424
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332
    Thanks to John N for reporting this issue.
  • bugfix: did not compile under solaris due to $uptime property code
    For the time being, $uptime is not supported on Solaris
  • bugfix: “last message repeated n times” message was missing hostname
    Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting

rsyslog 5.8.12 (v5-stable) released

By Adiscon SupportPosted on Posted in News, Release AnnouncementTagged , , , , ,

This is primarily a maintenance release. It includes several bugfixes for omudpspoof, debugging or disk queues as well as other fixes. For more details, please review the changelog.

ChangeLog:

http://www.rsyslog.com/changelog-for-5-8-12-v5-stable/

Download:

http://www.rsyslog.com/rsyslog-5-8-12-v5-stable/

As always, feedback is appreciated.

Best regards,

Florian Riedl

Changelog for 5.8.12 (v5-stable)

By Adiscon SupportPosted on Posted in ChangelogTagged , , , , ,

Version 5.8.12  [V5-stable] 2012-06-06

  • add small delay (50ms) after sending shutdown message
    There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system.
    Thanks to Marcin for bringing this problem up.
  • support for resolving huge groups
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310
    Thanks to Alec Warner for the patch
  • bugfix: delayble source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue – the “input” that is being held in that case is the main queue worker, what makes no sense.
    Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it.
  • bugfix: disk queue was not persisted on shutdown, regression of fix to
    http://bugzilla.adiscon.com/show_bug.cgi?id=299
    The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timeouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed.
  • bugfix/omudpspoof: problems, including abort, happend when run on multiple threads. Root cause is that libnet is not thread-safe. omudpspoof now guards libnet calls with their own mutex.
  • bugfix: if debug message could end up in log file when forking if rsyslog was set to auto-background (thus fork, the default) and debug mode to stdout was enabled, debug messages ended up in the first log file opened. Currently, stdout logging is completely disabled in forking mode (but writing to the debug log file is still possible). This is a change in behaviour, which is under review. If it causes problems to you, please let us know.
    Thanks to Tomas Heinrich for the patch.
  • bugfix/tcpflood: sending small test files did not work correctly
  • bugfix: potential hang due to mutex deadlock
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316
    Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it.
  • bugfix: property PROCID empty instead of proper nilvalue if not present
    If it is not present, it must have the nilvalue “-” as of RFC5424
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332
    Thanks to John N for reporting this issue.

rsyslog 6.3.9 (v6-beta) released

By Adiscon SupportPosted on Posted in News, Release AnnouncementTagged , , , , ,

This is a new beta release vor the v6 branch. It is a follow-up to the current devel-branch. This release contains a lot of bugfixes and has some new features added like the capability to specify substrings for field extraction mode or the new property “jsonf”. More detailed information can be found in the changelog.

Since this is a new beta version, it would be nice to get some test results on the features and fixes from the userbase. Responses can be submitted via the mailing list.

ChangeLog:

http://www.rsyslog.com/changelog-for-6-3-9-v6-beta/

Download:

http://www.rsyslog.com/rsyslog-6-3-9-beta/

As always, feedback is appreciated.

Best regards,
Florian Riedl

Changelog for 6.3.9 (v6-beta)

By Adiscon SupportPosted on Posted in ChangelogTagged , , , , ,

Version 6.3.9  [BETA] 2012-05-22

  • bugfix: imtcp could cause hang during reception this also applied to other users of core file tcpsrv.c, but imtcp was by far the most prominent and widely-used, the rest rather exotic (like imdiag)
  • added capability to specify substrings for field extraction mode
  • added the “jsonf” property replacer option (and fieldname)
  • bugfix: omudpspoof did not work correctly if no spoof hostname was configured
  • bugfix: property replacer option “json” could lead to content loss message was truncated if escaping was necessary
  • bugfix: assigned ruleset was lost when using disk queues
    This looked quite hard to diagnose for disk-assisted queues, as the pure memory part worked well, but ruleset info was lost for messages stored inside the disk queue.
  • bugfix/imuxsock: solving abort if hostname was not set; configured hostname was not used (both merge regressions)
  • bugfix/omfile: template action parameter was not accepted (and template name set to “??” if the parameter was used)
    Thanks to Brian Knox for alerting us on this bug.
  • bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql.  Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up).
  • bugfix: rsyslog did not terminate when delayable inputs were blocked due to unvailable sources. Fixes:
    http://bugzilla.adiscon.com/show_bug.cgi?id=299
    Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it.
  • added capability to specify substrings for field extraction mode
  • bugfix: disk queue was not persisted on shutdown, regression of fix to
    http://bugzilla.adiscon.com/show_bug.cgi?id=299
    The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed.
Scroll to top