rsyslog

The rocket-fast system for log processing

TwitterFacebookGoogle

Multiple Rulesets in rsyslog

Starting with version 4.5.0 and 5.1.1, rsyslog supports multiple rulesets within a single configuration. This is especially useful for routing the reception of remote messages to a set of specific rules. Note that the input module must support binding to non-standard rulesets, so the functionality may not be available with all inputs.

In this document, I am using imtcp, an input module that supports binding to non-standard rulesets since rsyslog started to support them.

What is a Ruleset?

If you have worked with (r)syslog.conf, you know that it is made up of what I call rules (others tend to call them selectors, a sysklogd term). Each rule consist of a filter and one or more actions to be carried out when the filter evaluates to true. A filter may be as simple as a traditional syslog priority based filter (like “*.*” or “mail.info” or a as complex as a script-like expression. Details on that are covered in the config file documentation. After the filter come action specifiers, and an action is something that does something to a message, e.g. write it to a file or forward it to a remote logging server.

A traditional configuration file is made up of one or more of these rules. When a new message arrives, its processing starts with the first rule (in order of appearance in rsyslog.conf) and continues for each rule until either all rules have been processed or a so-called “discard” action happens, in which case processing stops and the message is thrown away (what also happens after the last rule has been processed).

The multi-ruleset support now permits to specify more than one such rule sequence. You can think of a traditional config file just as a single default rule set, which is automatically bound to each of the inputs. This is even what actually happens. When rsyslog.conf is processed, the config file parser looks for the directive

ruleset(name="rulesetname");

Where name is any name the user likes (but must not start with “RSYSLOG_”, which is the name space reserved for rsyslog use). If it finds this directive, it begins a new rule set (if the name was not yet know) or switches to an already-existing one (if the name was known). All rules defined between this $RuleSet directive and the next one are appended to the named ruleset. Note that the reserved name “RSYSLOG_DefaultRuleset” is used to specify rsyslogd’s default ruleset. You can use that name wherever you can use a ruleset name, including when binding an input to it.

Inside a ruleset, messages are processed as described above: they start with the first rule and rules are processed in the order of appearance of the configuration file until either there are no more rules or the discard action is executed. Note that with multiple rulesets no longer all rsyslog.conf rules are executed but only those that are contained within the specific ruleset.

Inputs must explicitly bind to rulesets. If they don’t, the default ruleset is bound.

This brings up the next question:

What does “To bind to a Ruleset” mean?

This term is used in the same sense as “to bind an IP address to an interface”: it means that a specific input, or part of an input (like a tcp listener) will use a specific ruleset to “pass its messages to”. So when a new message arrives, it will be processed via the bound ruleset. Rules from all other rulesets are irrelevant and will never be processed.

This makes multiple rulesets very handy to process local and remote message via separate means: bind the respective receivers to different rule sets, and you do not need to separate the messages by any other method.

Binding to rulesets is input-specific. For imtcp, this is done via the

input(type="imptcp" port="514" ruleset="rulesetname");

directive. Note that “rulesetname” must be the name of a ruleset that is already defined at the time the bind directive is given. There are many ways to make sure this happens, but I personally think that it is best to define all rule sets at the top of rsyslog.conf and define the inputs at the bottom. This kind of reverses the traditional recommended ordering, but seems to be a really useful and straightforward way of doing things.

Why are rulesets important for different parser configurations?

Custom message parsers, used to handle different (and potentially otherwise-invalid) message formats, can be bound to rulesets. So multiple rulesets can be a very useful way to handle devices sending messages in different malformed formats in a consistent way. Unfortunately, this is not uncommon in the syslog world. An in-depth explanation with configuration sample can be found at the $RulesetParser configuration directive.

Can I use a different Ruleset as the default?

This is possible by using the

$DefaultRuleset <name>

Directive. Please note, however, that this directive is actually global: that is, it does not modify the ruleset to which the next input is bound but rather provides a system-wide default rule set for those inputs that did not explicitly bind to one. As such, the directive can not be used as a work-around to bind inputs to non-default rulesets that do not support ruleset binding.

Rulesets and Queues

By default, rulesets do not have their own queue. It must be activated via the $RulesetCreateMainQueue directive, or if using rainerscript format, by specifying queue parameters on the ruleset directive, e.g.

ruleset(name="whatever" queue.type="fixedArray" queue. ...)

See http://www.ryslog.com/doc/master/rainerscript/queue_parameters.html for more details.

Please note that when a ruleset uses its own queue, processing of the ruleset happens asynchronously to the rest of processing. As such, any modifications made to the message object (e.g. message or local variables that are set) or discarding of the message object have no effect outside that ruleset. So if you want to modify the message object inside the ruleset, you cannot define a queue for it. Most importantly, you cannot call it and expect the modified properties to be present when the call returns. Even more so, the call will most probably return before the message is even begun to be processed by the ruleset in question.

Note that in RainerScript format specifying any “queue.*” can cause the creation of a dedicated queue and as such asynchronous processing. This is because queue parameters cannot be specified without a queue. Note, though, that the actual creation is guaranteed only if “queue.type” is specified as above. So if you intentionally want to assign a separate queue to the ruleset, do so as shown above.

Examples

Split local and remote logging

Let’s say you have a pretty standard system that logs its local messages to the usual bunch of files that are specified in the default rsyslog.conf. As an example, your rsyslog.conf might look like this:

# ... module loading ...
# The authpriv file has restricted access.
authpriv.*  /var/log/secure
# Log all the mail messages in one place.
mail.*      /var/log/maillog
# Log cron stuff
cron.*      /var/log/cron
# Everybody gets emergency messages
*.emerg     *
... more ...

Now, you want to add receive messages from a remote system and log these to a special file, but you do not want to have these messages written to the files specified above. The traditional approach is to add a rule in front of all others that filters on the message, processes it and then discards it:

# ... module loading ...
# process remote messages
if $fromhost-ip == '192.0.2.1' then {
        action(type="omfile" file="/var/log/remotefile02")
        stop
    }


# only messages not from 192.0.2.1 make it past this point

# The authpriv file has restricted access.
authpriv.*                            /var/log/secure
# Log all the mail messages in one place.
mail.*                                /var/log/maillog
# Log cron stuff
cron.*                                /var/log/cron
# Everybody gets emergency messages
*.emerg                               *
... more ...

Note that “stop” is the discard action!. Also note that we assume that 192.0.2.1 is the sole remote sender (to keep it simple).

With multiple rulesets, we can simply define a dedicated ruleset for the remote reception case and bind it to the receiver. This may be written as follows:

# ... module loading ...
# process remote messages
# define new ruleset and add rules to it:
ruleset(name="remote"){
    action(type="omfile" file="/var/log/remotefile")
}
# only messages not from 192.0.21 make it past this point

# bind ruleset to tcp listener and activate it:
input(type="imptcp" port="10514" ruleset="remote")

Split local and remote logging for three different ports

This example is almost like the first one, but it extends it a little bit. While it is very similar, I hope it is different enough to provide a useful example why you may want to have more than two rulesets.

Again, we would like to use the “regular” log files for local logging, only. But this time we set up three syslog/tcp listeners, each one listening to a different port (in this example 10514, 10515, and 10516). Logs received from these receivers shall go into different files. Also, logs received from 10516 (and only from that port!) with “mail.*” priority, shall be written into a specific file and not be written to 10516’s general log file.

This is the config:

# ... module loading ...
# process remote messages

ruleset(name="remote10514"){
    action(type="omfile" file="/var/log/remote10514")
}

ruleset(name="remote10515"){
    action(type="omfile" file="/var/log/remote10515")
}

ruleset(name="remote10516"){
    if prifilt("mail.*") then {
        /var/log/mail10516
        stop
        # note that the stop-command will prevent this message from
        # being written to the remote10516 file - as usual...
    }
    /var/log/remote10516
}


# and now define listeners bound to the relevant ruleset
input(type="imptcp" port="10514" ruleset="remote10514")
input(type="imptcp" port="10515" ruleset="remote10515")
input(type="imptcp" port="10516" ruleset="remote10516")

Performance

Fewer Filters

No rule processing can be faster than not processing a rule at all. As such, it is useful for a high performance system to identify disjunct actions and try to split these off to different rule sets. In the example section, we had a case where three different tcp listeners need to write to three different files. This is a perfect example of where multiple rule sets are easier to use and offer more performance. The performance is better simply because there is no need to check the reception service - instead messages are automatically pushed to the right rule set and can be processed by very simple rules (maybe even with “*.*”-filters, the fastest ones available).

Partitioning of Input Data

Starting with rsyslog 5.3.4, rulesets permit higher concurrency. They offer the ability to run on their own “main” queue. What that means is that a own queue is associated with a specific rule set. That means that inputs bound to that ruleset do no longer need to compete with each other when they enqueue a data element into the queue. Instead, enqueue operations can be completed in parallel.

An example: let us assume we have three TCP listeners. Without rulesets, each of them needs to insert messages into the main message queue. So if each of them wants to submit a newly arrived message into the queue at the same time, only one can do so while the others need to wait. With multiple rulesets, its own queue can be created for each ruleset. If now each listener is bound to its own ruleset, concurrent message submission is possible. On a machine with a sufficiently large number of cores, this can result in dramatic performance improvement.

It is highly advised that high-performance systems define a dedicated ruleset, with a dedicated queue for each of the inputs.

By default, rulesets do not have their own queue. It must be activated via the $RulesetCreateMainQueue directive.

See Also

See also

Help with configuring/using Rsyslog:

  • Mailing list - best route for general questions
  • GitHub: rsyslog source project - detailed questions, reporting issues that are believed to be bugs with Rsyslog
  • Stack Exchange (View, Ask) - experimental support from rsyslog community

See also

Contributing to Rsyslog:

© 2008-2017, Rainer Gerhards and Others. This site uses the “better” theme for Sphinx.